Initial Cisco setup for lab plus auto save config

Router>enable

Router#configure terminal

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#line console 0

Router(config-line)#exec-timeout 0 0

Router(config-line)#logging synchronous

Router(config-line)#no ip domain lookup

Router(config)#event manager applet END-SAVE

Router(config-applet)#event syslog pattern "%SYS-5-CONFIG_I:"

Router(config-applet)#action 1.0 cli command "enable"

Router(config-applet)#action 2.0 cli command "write"

Router(config-applet)#hostname